English
EnglishWinding method
1. Check the winding amount of the reel (usually on the reel or packing box), and select the appropriate type of fishing line.
2. Install the fishing reel on the fishing rod, and turn off the fishing reel check switch.
3. Knot one end of the line, pass it through a guide ring of the fishing rod, open the fishing reel outlet ring, tie the line to the spool, close the outlet ring, pull the fishing line, and check and ensure its firmness.
4. Keep the fishing line straight and tight, and start to rotate the rocker at a constant speed to wind the line.
5. When the height of the winding line is about 1.5-2mm lower than the edge of the reel, keep the fishing line straight and tight, stop winding the line, cut the fishing line, and pin it on the other line piece of the reel.
Wheel loading method
1. Install the fishing reel on the fishing rod.
2. Turn on the backstop switch of the fishing reel, open the outlet ring of the fishing reel, pull out the line, close the outlet ring, and pass the line through the fishing rod guide ring in turn.
3. Tie the falling line, tighten the joints of the fishing rod, and close the fishing reel.
Throwing method
1. Turn on the backstop switch of the fishing reel, turn the rocker, adjust the line drop to an appropriate position, and turn off the backstop switch.
2. Hook the fishing line with your index finger, turn your head sideways, and send the rod back. The distance between the rod and the ground is better when the line falls to the ground.
3. Push the rod side up and forward. When the rod is in front of the side and at a 45-degree angle to the ground, loosen the thread by shaking force and pop out the thread dropper.
4. When the line falls into the water after the line feeding is finished, shake the rocker, close the outlet ring, tighten the fishing line, and put the rod on the rod holder.
Ultra-Stable Oscillation: CNC aluminum spool and interchangeable left and right handle provide a reliable reel for years of big game fishing. The 5.1:1 gear ratio is designed to fight monsters and give you the confidence to land your biggest saltwater fish there.
Wide Range of Drag Adjustment: Rugged oversized shaft, compact self-balancing system rotors provide rock-stable retrieval when landing large aircraft. The sturdy aluminum spool holds heavy monofilament or braided wire for long casting distances. Tuna, shark, yellowtail, sea bass, kingfish, mackerel, all the big fish are waiting to be challenged.
Durable: Provides improved gear durability. By supporting the pinion with bearings at both ends, the pinion is kept in precise alignment with the drive gear. This means the gears will stay in the same position under the heaviest loads. An added benefit is the elimination of friction between the spool shaft and gear. This will increase the casting performance of the reel with lighter lures and allow for longer casting times.
